Blink (Hydroxypropyl Methylcellulose) belongs to ophthalmic eye medications used to treat dryness of the eyes. Hydroxypropyl Methylcellulose acts as artificial tears. Also, it is used to lubricate artificial eyes and moisten hard contact lenses. A dry eye is a common condition that occurs when tears are unable to provide sufficient moisture. The symptoms include redness, pain, burning sensation, blurred vision, discomfort in the eye, watery eyes, difficulty reading or sitting in front of the computer for a long time, or eyes getting tired faster than usual. Blink (Hydroxypropyl Methylcellulose) contains Hydroxypropyl methylcellulose (eye lubricant). Hydroxypropyl Methylcellulose works by forming a lubricating, transparent, and moistening film on the cornea (surface of the eye). Thereby, it provides a soothing effect and relieves irritation and dryness caused by decreased tear flow.

Blink Eye Drop is an eye lubricant or artificial tears used to relieve dry eyes. This can happen because not enough tears are made to keep the eye lubricated. It helps to soothe the irritation and burning seen in dry eyes by maintaining proper lubrication of the eyes. Blink Eye Drop is usually taken when needed. Use the number of drops as advised by your doctor. Wait for at least 5-10 minutes before delivering any other medication in the same eye to avoid dilution. Do not use a bottle if the seal is broken before you open it. Always wash your hands and do not touch the end of the dropper. This could infect your eye. This medicine may require long-term use and can be taken safely for as long as you need it. The most common side effects of using this medicine include eye irritation (including burning and discomfort), eye pain, eye itching, and visual disturbance. They are usually temporary and disappear with time. However, let your doctor know if they persist or get worse. Do not drive, use machinery, or do any activity that requires clear vision until you are sure you can do it safely. Consult your doctor if your condition does not improve or if the side effects bother you.

Visiotears helps to lubricate eyes and treat mild to moderate dry eye conditions. Visiotears contains povidone and polyvinyl alcohol. Povidone lubricates and moistens film on the surface of the eye. Polyvinyl alcohol decreases the surface tension of the tears so that they spread more easily over the surface of the eye and don’t break into dry spots. It also has properties similar to the natural mucin (a type of glycoprotein) produced by the conjunctiva, which soothes and lubricates the eye and enhances the stability of the tear film. Visiotears is indicated for the relief from dry eye in cases of Keratoconjunctivitis sicca.

Computer Eye Drops containing Polyethylene Glycol (PEG) and Propylene Glycol are lubricant eye drops (also called artificial tears) used to relieve symptoms of dry eye—especially due to digital eye strain or prolonged screen time. 🔹 Primary Uses Dry Eye Syndrome Provides moisture and lubrication to relieve dryness, grittiness, or irritation in the eyes. Computer Vision Syndrome (CVS) / Digital Eye Strain Ideal for people spending long hours in front of screens, which reduces blinking and leads to dry eyes. Environmental Eye Irritation Soothes eyes affected by wind, smoke, air conditioning, or low humidity. Contact Lens Discomfort (if the formulation is approved for lens wear) Some PEG/propylene glycol drops are safe to use with lenses. 🔹 How It Works Polyethylene Glycol and Propylene Glycol are humectants and lubricants. They form a protective film on the eye surface that retains moisture and soothes irritation. ⚠️ Common Side Effects Temporary blurred vision after application Mild burning or stinging Watery eyes (reflex tearing) 🔹 Usage Tips Usually used as needed, often 1–2 drops per eye Blink gently to spread the drop evenly Do not touch the dropper tip to the eye Wait 10–15 minutes before inserting contact lenses (if compatible)

Eye Blink Carboxymethyl Cellulose 1% Lubricant Eye Drops are used to relieve dryness and irritation in the eyes. Here's a clear breakdown: 🔹 Primary Uses Dry Eye Syndrome Helps soothe and lubricate eyes that feel dry, gritty, or tired. Computer Vision Syndrome / Screen Fatigue Used to refresh and moisten eyes strained from long screen time. Environmental Eye Irritation Protects eyes from wind, smoke, pollution, or air conditioning. Post-Surgery or Contact Lens Use (as advised) Sometimes recommended after eye procedures or with contact lens wear (only if approved for contact use). 🔹 How It Works Carboxymethyl Cellulose (CMC) is a lubricating agent that mimics natural tears. Forms a protective, soothing film on the eye surface, reducing friction and keeping the eyes moist.

Trehalube 10 ml Eye Drops Active Ingredient: Sodium Hyaluronate (1 mg/ml) Manufacturer: Micro Labs Ltd Uses Dry Eyes: Relieves dryness, irritation, and burning sensations in the eyes. Post-Surgical Eye Care: Provides moisture and comfort after eye surgeries such as cataract removal. Contact Lens Comfort: Lubricates eyes to reduce discomfort caused by contact lens wear. Corneal Burns: Helps form a protective layer to aid in the healing of corneal burns. How It Works Sodium Hyaluronate in Trehalube mimics the natural tears in the eye, stabilizing the tear film, reducing friction, and providing lasting moisture and comfort. How to Use Wash your hands thoroughly before using the drops. Tilt your head back and gently pull down the lower eyelid to form a pocket. Instill 1–2 drops as prescribed into the pocket of the lower eyelid. Close your eye and blink a few times to spread the drop across the surface. Avoid touching the dropper tip to any surface to keep the drops sterile. Recap the bottle and wash your hands again. Typical Dosage Usually, 1–2 drops in each affected eye, 2–3 times a day, or as directed by your doctor. Common Side Effects Mild irritation or stinging when applied. Temporary blurred vision. Increased tearing. Precautions Do not use if allergic to Sodium Hyaluronate or any other ingredients in the product. Remove contact lenses before using and wait 15 minutes before reinserting them. Store the bottle at room temperature (15–25°C) and away from light. Discard the bottle 8 weeks after opening. Avoid activities that require clear vision if you experience temporary blurred vision.

Rebacer 10 ml Eye Drop – Overview Composition: Rebamipide 2% w/v Manufacturer: Ajanta Pharma Ltd Type: Ophthalmic (eye) solution Category: Prescription medication 💊 Uses Rebacer Eye Drops are used for the treatment of dry eye syndrome (Keratoconjunctivitis sicca). It helps relieve: Eye dryness Burning or stinging sensation Redness Sensitivity to light Blurred vision Discomfort or irritation in the eyes The active ingredient, Rebamipide, improves tear film stability and increases mucin production, helping to lubricate and protect the eye surface. 💧 How to Use Wash your hands before use. Shake the bottle well. Tilt your head back and gently pull down your lower eyelid. Instill one drop into the affected eye. Close your eyes and press the inner corner of the eye for 1–2 minutes. Avoid touching the dropper tip to any surface. If you're using contact lenses, remove them before use and wait 15 minutes before reinserting. ⚠️ Precautions Do not use if allergic to Rebamipide or any component of the drop. Use during pregnancy or breastfeeding only under medical advice. May cause temporary blurred vision—avoid driving immediately after use. Maintain a gap of 5–10 minutes between multiple eye medications. 💊 Possible Side Effects Eye irritation Itching or burning Mild discomfort Temporary blurred vision Most side effects are temporary. If symptoms persist or worsen, consult your doctor.

A healthy eye produces enough tears to keep it moist and healthy. However, in patients with Dry Eyes or Keratoconjunctivitis sicca (KCS), either the amount of tear production is reduced or the rate at which the tear evaporates is increased. Visioaid is Schirmer’s test strip (STT) that helps to diagnose KCS. Based on the extent to which the STT strip is moistened by tears, the veterinarian is able to diagnose the severity of KCS and provide suitable treatment. The veterinarian will place the tip of VISIOAID inside the eyelid, closes the eye, and holds the paper for exactly 60 seconds. The distance travelled by the tears on the VISIOAID strip in sixty seconds is recorded and the diagnosis is made.

Taurians contains 2 potent anti-oxidants – N-acetyl cysteine & Taurine. Taurine is an amino acid that both dogs and cats require for good health. For cats, taurine is necessary for brain, nerves, eyes, heart, digestion, immune function and fetal development. For dogs, taurine is needed for eyes, reproduction, bile acid (for fat digestion) and for healthy heart. N-Acetylcysteine is useful in treating conditions that involve tissue damage due to oxidative stress and toxicity, Taurians helps to protect against damage from oxidative stress in patients with chronic kidney disease, reduces risk of cardiovascular disease, promotes healthy liver, prevents or reduces glomerular damage due to diabetes, and promotes clean & healthy lungs.