Blink Plus (Polyethylene & Propylene Glycol) Ophthalmic Solution is an over-the-counter eye drop formulation designed to provide relief for dry or irritated eyes. Here's an overview of its uses, dosage, side effects, and safety considerations: ________________________________________ 🔍 Uses Blink Plus combines two lubricating agents: • Polyethylene Glycol 400 (0.4%): Acts as a lubricant to relieve dryness and irritation by providing moisture to the eyes. It creates a protective layer on the eye's surface, reducing discomfort and enhancing tear film stability. Propylene Glycol (0.3%): Functions as a solvent and humectant, helping to dissolve and stabilize the active ingredients while attracting moisture to the eye, aiding in hydration and alleviating dryness. This combination is used to treat dry eye symptoms caused by environmental factors such as wind, sun, air conditioning, or prolonged screen time. ________________________________________ 💧 Dosage and Administration • General Dosage: Instill one or two drops into the affected eye(s) as needed. • Application Method: 1. Wash your hands thoroughly before use. 2. Tilt your head back slightly and pull down the lower eyelid to form a pouch. 3. Hold the dropper above the eye and instill the prescribed number of drops. 4. Close the eye gently and apply gentle pressure to the inner corner of the eye for 1 to 2 minutes to prevent the medication from draining away. 5. Avoid touching the dropper tip to any surface, including the eye, to prevent contamination. ________________________________________ ⚠️ Safety and Side Effects • Common Side Effects: o Temporary blurred vision. o Mild burning or stinging sensation upon application. o Eye discomfort or irritation. • Redness or watering of the eyes. • Serious Side Effects: o Persistent eye pain or swelling. o Allergic reactions such as rash, itching, swelling, or severe dizziness. • Precautions: o Consult your doctor if you are pregnant or breastfeeding, as the safety of Blink Plus during these periods is not well-established. o Use with caution if you have a history of eye infections or other eye conditions. o Avoid driving or operating machinery if you experience blurred vision or visual disturbances.

Biomox Eye Drop is an antibiotic, used in the treatment of bacterial infections of the eye. It relieves the symptoms of the infection by stopping the further growth of the causative microorganisms. Biomox Eye Drop is for external use only. Take it in the dose and duration as advised by your doctor. Hold the dropper close to the eye without touching it. Gently squeeze the dropper and place the medicine inside the lower eyelid. Wipe off extra liquid. Avoid skipping any doses and finish the full course of treatment even if you feel better. It may cause eye discomfort, dry eyes and burning sensation in the eyes immediately following application. However, these side effects are temporary and usually subside on their own. Inform your doctor if they persist for a longer duration. It may cause short term blurring of vision when first used. Use caution before driving or using machines. Do not wear contact lenses while using it.

Biomox.p Eye Drop is an antibiotic, used in the treatment of bacterial infections of the eye. It relieves the symptoms of the infection by stopping the further growth of the causative microorganisms. Biomox.p Eye Drop is for external use only. Take it in the dose and duration as advised by your doctor. Hold the dropper close to the eye without touching it. Gently squeeze the dropper and place the medicine inside the lower eyelid. Wipe off extra liquid. Avoid skipping any doses and finish the full course of treatment even if you feel better. It may cause eye discomfort, dry eyes and burning sensation in the eyes immediately following application. However, these side effects are temporary and usually subside on their own. Inform your doctor if they persist for a longer duration. It may cause short term blurring of vision when first used. Use caution before driving or using machines. Do not wear contact lenses while using it.

Blink (Hydroxypropyl Methylcellulose) belongs to ophthalmic eye medications used to treat dryness of the eyes. Hydroxypropyl Methylcellulose acts as artificial tears. Also, it is used to lubricate artificial eyes and moisten hard contact lenses. A dry eye is a common condition that occurs when tears are unable to provide sufficient moisture. The symptoms include redness, pain, burning sensation, blurred vision, discomfort in the eye, watery eyes, difficulty reading or sitting in front of the computer for a long time, or eyes getting tired faster than usual. Blink (Hydroxypropyl Methylcellulose) contains Hydroxypropyl methylcellulose (eye lubricant). Hydroxypropyl Methylcellulose works by forming a lubricating, transparent, and moistening film on the cornea (surface of the eye). Thereby, it provides a soothing effect and relieves irritation and dryness caused by decreased tear flow.

Blink Eye Drop is an eye lubricant or artificial tears used to relieve dry eyes. This can happen because not enough tears are made to keep the eye lubricated. It helps to soothe the irritation and burning seen in dry eyes by maintaining proper lubrication of the eyes. Blink Eye Drop is usually taken when needed. Use the number of drops as advised by your doctor. Wait for at least 5-10 minutes before delivering any other medication in the same eye to avoid dilution. Do not use a bottle if the seal is broken before you open it. Always wash your hands and do not touch the end of the dropper. This could infect your eye. This medicine may require long-term use and can be taken safely for as long as you need it. The most common side effects of using this medicine include eye irritation (including burning and discomfort), eye pain, eye itching, and visual disturbance. They are usually temporary and disappear with time. However, let your doctor know if they persist or get worse. Do not drive, use machinery, or do any activity that requires clear vision until you are sure you can do it safely. Consult your doctor if your condition does not improve or if the side effects bother you.

F M N Eye Drops contain Fluorometholone, a corticosteroid used to treat inflammation and other related conditions of the eyes. Here's an overview of its uses: 🔹 Primary Uses Anti-Inflammatory Treatment Fluorometholone is a mild corticosteroid that helps reduce inflammation in the eye. It is often prescribed for conditions like conjunctivitis (inflammation of the conjunctiva), iritis (inflammation of the iris), and uveitis (inflammation of the uvea, the middle layer of the eye). Post-Surgical Inflammation It is commonly used to control inflammation and swelling after eye surgeries, such as cataract surgery or other procedures, to help reduce discomfort and promote healing. Allergic Eye Conditions Fluorometholone may be used for treating allergic reactions that cause eye redness, itching, and swelling, such as in seasonal allergic conjunctivitis or vernal keratoconjunctivitis. Eye Infections (with inflammation) In some cases, it may be used for eye infections that cause inflammation, although it's important to note that it should not be used for infections caused by viruses, fungi, or bacteria unless combined with other appropriate treatments. 🔹 How It Works Fluorometholone is a steroid that works by suppressing the immune response in the eye. It inhibits the production of chemicals called prostaglandins, which are responsible for causing inflammation, swelling, and pain. By reducing inflammation, the drops help relieve symptoms like redness, swelling, and discomfort. ⚠️ Common Side Effects Eye irritation, burning, or stinging upon application Blurred vision (usually temporary) Increased intraocular pressure (IOP) with prolonged use, which may lead to glaucoma or cataract formation Redness or dryness of the eyes Sensitivity to light (photophobia) Watering eyes 🔹 Usage Tips Dosage: Typically, 1-2 drops are applied to the affected eye(s), 2 to 4 times a day, or as prescribed by your doctor. Application Instructions: Wash your hands thoroughly before applying the drops. Tilt your head back and gently pull down the lower eyelid to form a small pocket. Place 1 drop in the pocket, and then gently close your eye and blink a few times to spread the medication evenly across the eye. If using other eye medications, wait 5–10 minutes between each. Contact Lenses: Remove contact lenses before applying the drops and wait 15 minutes before reinserting them. 🔹 Precautions Infections: Avoid using Fluorometholone if you have an active eye infection (especially viral or fungal), as corticosteroids can suppress the immune response and worsen infections. Eye Pressure: Fluorometholone can increase the intraocular pressure (IOP) over time, which may lead to glaucoma. It is important to monitor IOP regularly if used long-term. Pregnancy and Breastfeeding: Consult your doctor before using this medication if you are pregnant or breastfeeding, as corticosteroids should be used cautiously in these situations. Prolonged Use: Long-term use of corticosteroid eye drops should be under close supervision of a healthcare provider, as it can lead to complications like cataracts or glaucoma.

Cromoglicate 4% Eye Drops (Cromopar) are used primarily for the prevention and treatment of allergic eye conditions. Here's an overview of how it works and when it’s typically used: 🔹 Primary Uses Allergic Conjunctivitis Cromoglicate (also known as Sodium Cromoglycate) is a mast cell stabilizer that helps to prevent the release of histamine and other inflammatory mediators. This makes it effective for treating eye allergies such as: Seasonal Allergies (e.g., pollen) Perennial Allergies (e.g., dust, pet dander) Preventing Eye Symptoms of Allergies Relieves symptoms such as itchiness, redness, watering, and swelling associated with allergic reactions in the eyes. 🔹 How It Works Cromoglicate works by stabilizing mast cells in the eye, which are responsible for releasing histamine during allergic reactions. By preventing this release, the eye drop reduces inflammation and relieves allergy symptoms. ⚠️ Common Side Effects Temporary burning or stinging after application Mild eye irritation Blurred vision (typically short-term) Dryness in the eye (rare) 🔹 Usage Tips Frequency: Usually, 1 drop in each eye 4 times a day (or as prescribed by your doctor). Application: Wash your hands before use. Tilt your head back and pull down your lower eyelid. Drop the medication into the pocket formed by your lower eyelid. Close your eye gently and blink to spread the solution. Avoid touching the dropper tip to your eye or any surface to prevent contamination. Duration: It works best when used regularly (even when you’re not experiencing symptoms) to prevent allergic reactions. 🔹 Precautions Contact Lenses: Wait at least 15 minutes before putting your contact lenses back in. Consistency: The drops should be used regularly to manage symptoms, and the full course should be completed even if symptoms improve. Avoid: If you have sensitivity to any ingredients, consult your doctor before use.

Computer Eye Drops containing Polyethylene Glycol (PEG) and Propylene Glycol are lubricant eye drops (also called artificial tears) used to relieve symptoms of dry eye—especially due to digital eye strain or prolonged screen time. 🔹 Primary Uses Dry Eye Syndrome Provides moisture and lubrication to relieve dryness, grittiness, or irritation in the eyes. Computer Vision Syndrome (CVS) / Digital Eye Strain Ideal for people spending long hours in front of screens, which reduces blinking and leads to dry eyes. Environmental Eye Irritation Soothes eyes affected by wind, smoke, air conditioning, or low humidity. Contact Lens Discomfort (if the formulation is approved for lens wear) Some PEG/propylene glycol drops are safe to use with lenses. 🔹 How It Works Polyethylene Glycol and Propylene Glycol are humectants and lubricants. They form a protective film on the eye surface that retains moisture and soothes irritation. ⚠️ Common Side Effects Temporary blurred vision after application Mild burning or stinging Watery eyes (reflex tearing) 🔹 Usage Tips Usually used as needed, often 1–2 drops per eye Blink gently to spread the drop evenly Do not touch the dropper tip to the eye Wait 10–15 minutes before inserting contact lenses (if compatible)

Eye Blink Carboxymethyl Cellulose 1% Lubricant Eye Drops are used to relieve dryness and irritation in the eyes. Here's a clear breakdown: 🔹 Primary Uses Dry Eye Syndrome Helps soothe and lubricate eyes that feel dry, gritty, or tired. Computer Vision Syndrome / Screen Fatigue Used to refresh and moisten eyes strained from long screen time. Environmental Eye Irritation Protects eyes from wind, smoke, pollution, or air conditioning. Post-Surgery or Contact Lens Use (as advised) Sometimes recommended after eye procedures or with contact lens wear (only if approved for contact use). 🔹 How It Works Carboxymethyl Cellulose (CMC) is a lubricating agent that mimics natural tears. Forms a protective, soothing film on the eye surface, reducing friction and keeping the eyes moist.